Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Connecting a source to 7060B - Sensitivity Adjustment issue

clearsignal, modified 4 Years ago.

Connecting a source to 7060B - Sensitivity Adjustment issue

Padawan Posts: 50 Join Date: 3/2/18 Recent Posts

Greetings, good Gelenecsters…

 

I’m in the process of procuring a new 7060B for my 1030A pair.

 

My source is a DAP (Astell&Kern) with an unbalanced output level rated at 3.9Vrms (= 14dBbu).

However, the 7060 sensitivity can only be dialed up to 12dBu.

 

So…am I out of luck and my DAP isn’t compatible with the sub?

Or should I just set the dial on the sub to 12dBu and prey for the best?

 

Manny thanks for any kind person who can offer an answer.