Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8351a and GLM

lordtom, modified 4 Years ago.

8351a and GLM

Youngling Posts: 2 Join Date: 3/24/18 Recent Posts

so I got my first Genelec today (8351a with GLM). I have the #1 dip switch turned on and I ran the Autocal.  When i try to click on File in the GLM software, the dropdown just flashes and will not allow me to click "Store".  What am I doing wrong.  you help is greatly appreciated.

Thanks 

Lordtom

 

manutal, modified 4 Years ago.

RE: 8351a and GLM

Jedi Knight Posts: 180 Join Date: 4/25/14 Recent Posts
Its row number 2 first dip. The lower row of dips.
jani-oksanen, modified 4 Years ago.

RE: 8351a and GLM

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Welcome to the Genelec family! First I would advice you to download latest GLM 3 from our website. If you have latest GLM 3 already, please re-download and install it.

If the issue continues, please contact us at support@genelec.com

Best Regards,
Jani Oksanen
Customer Support Team